Timing Relay errors

[eLapsRaceTiming]

A problem has been identified with the Timing Relay feature.

If an invalid IP address has been entered, and the Start button is clicked, the Timing Relay will fail to connect, and no error message is displayed.

After this failure to connect, the 'SpeedFeedService' windows service stops.

With the service stopped, the Timing Relay will give errors when trying to start.

To fix these errors, restart the 'SpeedFeedService' service (in Windows Firewall), and enter a valid IP address - this IP address should be the IP address of the PC running e-Laps.

UPDATE:
This issue should not arise anymore - the IP address field no longer needs to be editable.