How to Start Timing Relay - Printable Version +- e-Laps Support Forum (http://www.e-laps.com/forum) +-- Forum: User Support (/forumdisplay.php?fid=1) +--- Forum: e-Laps How To Guides (/forumdisplay.php?fid=3) +---- Forum: How To Start Timing Relay (/forumdisplay.php?fid=27) +---- Thread: How to Start Timing Relay (/showthread.php?tid=11)

How to Start Timing Relay - eLapsRaceTiming - 19-Aug-2014 08:25 PM NOTE: A 'Firewall Exception' for SpeedFeedService.exe should be automatically added during e-Laps installation. The following Firewall information is provided for reference. Configure your Firewall by clicking the 'Allow a program or feature through Windows Firewall' menu item in Windows Firewall. The program you need to allow through is "SpeedFeedService.exe". This program is installed in C:\Users\[USER ACCOUNT]\AppData\Roaming\eLapsBufferHandler Your Firewall settings for SpeedFeedService.exe should look like the following screen shot: In e-Laps, on the Network Setup page (7th Menu from the top) click Start on the Timing Relay Server tab... the Output IP and Port fields should turn green. Configure your Speed-Feed phone app to connect to the displayed IP address and port number (and password if required). If you are connected to a live decoder (with transponders passing), Speed-Feed will begin receiving the timing feed from e-Laps. When 'clients' are connected to e-Laps Timing Relay Server, depending upon how they have their Speed-Feed configured, you can view which transponder they have tagged, and what name they have entered for the tagged transponder, as shown in the following screen shot: More information on configuring Speed-Feed can be found here: http://www.speed-feed.com/ Information on the Disconnect and Ban Client buttons is coming soon.